Here's a quick guide to set up focus targeting to easily switch back to a selected target i.e. your tank.
Keyboard:1.Hit Esc.
2.Go to Keybind, and go to the "Targeting" tab at the top.
3.Scroll down till you find "Set Focus Target". Make sure this is set to "Shift + F". This will select your current target as your Focus Target.
4.Beneath that find "Target Current Focus Target". Set to "F". Every time you hit "F" your target will switch immediately to your Focus Target.
Controller:For this you will need to set up two macros.
The first will be the following:/focustarget <t>
The second will be the following: /target <focus>
Now place the two macros on your crossbar. Select the person you wish to focus and hit the first macro to set your Focus Target. Now when you use the second macro your target will switch to your Focus Target.
Controller KeybindYou can set the macros to left and right analog stick clicks using the following method:
Assign the macros to macro numbers 98 & 99
Go to System Config -> Controller Settings ->Controller Customization -> Begin
You can assign macros 98 & 99 to the analog clicks from there on the bottom two options.
Thank you Leo for helping me figure that out!
If you don't know about macros here's a vid:
Lets keep these folks alive!!
Please like if you found this helpful! It lets me know that its...well helpful :D
never knew this was how you did it now I'm going to make an macro and use it.
Wow, this is super useful! Thank you for showing me this.
Was watching a video for a raid I'd never done and noticed the POV had a "Focus Target" widget. Figured that even as DPS, this could be helpful so I looked it up. Your guide was the first that popped up!
Thanks for writing this up!